Cavity Wall Insulation

BASF WALLTITE cavity wall insulation is used to restore the structural stability and reduce the thermal transmittance of existing cavity walls, with masonry inner and outer levels, in which the conventional wall ties have corroded.

It is also used in new construction where its superior thermal performance and resistance to flood water cavity wall insulation installer is of importance. It has excellent resistance to driving rain and can be installed in all geographical exposure zones. BASF WALLTITE insulation is also ideal where the need to reduce air leakage is important.

The foam completely seals the cavity and does not shrink and so air leakage through the cavity can be reduced to zero. WALLTITE closed cell cavity wall insulation stabilises the wall by adhering to the inner surfaces of the cavity and providing a continuous structural connection between the two leaves.

Spray Foam Insulation - BASF-Walltite-CV-100

Because of the greater thermal performance and the reduced air leakage, WALLTITE outperforms all other forms of cavity fill. It is hypoallergenic and so contains no fibers, dust or obnoxious fumes. BASF WALLTITE foam injection insulation is installed by trained BASF Foam Master contractors and is British Board of Agrément approved. To supplement this assurance BASF cavity wall insulation.

Installation also offers a 10 year product guarantee. With a thermal conductivity of 0.025 W/mk WALLTITE achieves a U-value of 0.21 W/m2k over a 120mm cavity width as required by TGD 2011 Part L – Elemental U- values. Other U-value calculations can be provided by contacting the ECON technical team. WALLTITE cavity wall insulation, then provides an airtight, watertight insulation layer coupled with the highest rate of heat resistance possible for cavity wall injection systems.

Click here to contact us for a FREE Home Energy Survey